Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Requirements

4.1 Categories of toy materials

4.1.1 Category I: Dry, brittle, dust-like or pliable material

4.1.2 Category II: Liquid or adhesive material

4.1.3 Category III: material scraped

4.1.4 Categories of different toy materials

4.2 Specific Requirements

5 Short Description

6 Reagents and Equipment

1.6 Reagents

6.2 Device

7 Sampling and Sample Preparation

7.1 Selection of samples for analysis

7.2 Preparation of standards

7.3 Sample Preparation

7.3.1 Category I: Dry, brittle, smooth or powdery materials and Category II: Liquid or sticky materials

7.3.2 Category III: material scraped

4.7 migration procedures

7.4.1 General

7.4.2 Category I: Dry, brittle, smooth or powdery materials and Category II: Liquid or sticky materials

7.4.3 Category III: material scraped

8 Analysis Method

8.1 General

8.2 Chromium (VI) (speciation)

3.8 Organotin

9 Calculation of results

9.1 Standard Elements

9.1.1 Calibration Curves

9.1.2 Calculation of the concentration

9.1.3 Evaluation

9.2 Chromium (III) and chromium (VI)

9.2.1 Calibration Curves

9.2.2 Calculation of the concentration

9.2.3 Evaluation

3.9 Organotin

9.3.1 Calibration Curves

9.3.2 Calculation of the migration of individual organotin compounds

9.3.3 Calculation of the migration of organotin

9.3.4 Evaluation

10 Test report

Annex A (informative) Significant technical changes between this European Standard and the previous version

Annex B (informative) Results of laboratory proficiency testing - migration of elements (May 2012)

Annex C (normative) Requirements for Sieve

Annex D (informative) Preparation and analysis of the sample

Annex E (informative) Preparation of standards

E.1 ICP-MS

E.1.1 stock solution (M1)

E.1.2 Diluted stock solution (M2)

E.1.3 Work Solutions

E.2 ICP-OES

E.2.1 stock solution (M1)

E.2.2 Work Solutions

Annex F (informative) Analysis Method

F.1 ICP-parameter

F.2 method for speciation of chromium

F.2.1 Scope

F.2.2 Summary

F.2.3 reagents

F.2.4 test equipment

F.2.5 Method

F.2.6 reporting

F.2.7 Example for LC-ICP-MS conditions

F.3 procedures for organotin

F.3.1 Scope

F.3.2 terms

F.3.3 Summary

F.3.4 reagents

F.3.5 test equipment

F.3.6 process

F.3.7 Example for the gas chromatography conditions

Annex G (informative) Rationale

G.1 skin contact (scope)

G.2 organotin (F.3.7.2)

Annex H (informative) Additional information on inspection of certain elements

Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2009/48/EC (If (created in due time))

References

该帖子作者被版主 yuduoling加 4积分， 2经验，加分理由：分享加分