主题:【有奖讨论】原子吸收中操作不当易损坏的部件有哪些?

浏览0 回复53 电梯直达
悠旸
结帖率:
100%
关注:0 |粉丝:0
新手级: 新兵
没有使用过,效果好吗?是几种元素合一的?
原文由 quinc(quinc) 发表:
多元素灯。
悠旸
结帖率:
100%
关注:0 |粉丝:0
新手级: 新兵
是呀,但知道原因就能避免。对吗?
原文由 yuzengsheng(yuzengsheng) 发表:
主要是元素灯如果使用的时候电流不注意就十分易坏
poplar_yang
结帖率:
100%
关注:0 |粉丝:0
新手级: 新兵
we have no so many problem about lamp, maybe because our lamps have better quality from ThermoFisher. But we do have problem of compressed air, the humidity from compressor make the inside piping blocked, we have to change the gas valve, even the whole 'gas room' in the machine.
该帖子作者被版主 ljhciq2积分, 2经验,加分理由:参与
秋月芙蓉
结帖率:
100%
关注:0 |粉丝:0
新手级: 新兵
原文由 poplar_yang(poplar_yang) 发表:
we have no so many problem about lamp, maybe because our lamps have better quality from ThermoFisher. But we do have problem of compressed air, the humidity from compressor make the inside piping blocked, we have to change the gas valve, even the whole 'gas room' in the machine.

我们热电的空压机对湿度的变化也有影响--发出异响,通常敲打或用重物压放处理,没考虑太多,不知专家如何“ change the gas valve”?
yuzengsheng
结帖率:
100%
关注:0 |粉丝:0
新手级: 新兵
雾化器和石墨管以及元素灯
该帖子作者被版主 ljhciq2积分, 2经验,加分理由:参与
cly779
结帖率:
100%
关注:0 |粉丝:0
新手级: 新兵
石墨管经常换,其它的都没怎么坏过,灯电流我们都是用默认值的,不怎么容易坏啊
该帖子作者被版主 ljhciq2积分, 2经验,加分理由:参与
sgstone
结帖率:
100%
关注:0 |粉丝:0
新手级: 新兵
雾化球最容易坏,稍不留意就会弄断!
该帖子作者被版主 ljhciq2积分, 2经验,加分理由:参与
悠旸
结帖率:
100%
关注:0 |粉丝:0
新手级: 新兵
没错,装机球已坏。那就在维护时加倍小心吧。
原文由 sgstone(sgstone) 发表:
雾化球最容易坏,稍不留意就会弄断!
wwp123
结帖率:
100%
关注:0 |粉丝:0
新手级: 新兵
点火装置也容易损坏。
该帖子作者被版主 ljhciq1积分, 2经验,加分理由:参与
悠旸
结帖率:
100%
关注:0 |粉丝:0
新手级: 新兵
点火装置不属于易损部件呀,是什么型号的仪器呢?
原文由 wwp123(wwp123) 发表:
点火装置也容易损坏。
猜你喜欢最新推荐热门推荐更多推荐
品牌合作伙伴