原文由 youjian000 发表:
10.2.1.1 Connection 连接
IdleTimeout=(seconds) 空闲超时(单位为:秒)
Disconnect idle clients after 在...秒后断开客户程序
An idle client is one which has transmitted no keyboard or pointer events for more than a certain length of time. The K4000RC Server can be configured with a threshold, expressed in seconds, after which idle clients will be disconnected to conserve resources.
一个空闲的客户机程序是指:在某一确定时间内,该客户程序没有传输键盘或指针事件。可以给K4000RC服务器配置一个阈值,单位用秒表示,超过这个阈值后,将断开空闲的客户机程序,以节省资源。
原文由 youjian000 发表:
10.2.1.1 Connection 连接
IdleTimeout=(seconds) 空闲超时(单位为:秒)
Disconnect idle clients after 在...秒后断开客户程序
An idle client is one which has transmitted no keyboard or pointer events for more than a certain length of time. The K4000RC Server can be configured with a threshold, expressed in seconds, after which idle clients will be disconnected to conserve resources.
一个空闲的客户机程序是指:在某一确定时间内,该客户程序没有传输键盘或指针事件。可以给K4000RC服务器配置一个阈值,单位用秒表示,超过这个阈值后,将断开空闲的客户机程序,以节省资源。
原文由 youjian000 发表:
If the threshold specified is zero second, then connections never times out. The default idle timeout is one hour.
如果阈值指定为零秒,那么连接就永不超时。默认的空闲超时为一小时。
Note that pointer and keyboard events received from clients prevent their connection to reach the timeout even if the K4000RC Server is configured to ignore those events (see below).
要注意的是:即使已将K4000RC服务器配置为忽略这些来自客户程序的指针和键盘事件,这些事件还是会阻止客户程序连接达到超时。(见下面)
原文由 redanqi 发表:原文由 youjian000 发表:
10.2.1.1 Connection 连接
IdleTimeout=(seconds) 空闲超时(单位为:秒)
Disconnect idle clients after 在...秒后断开客户程序
a certain length of time 一定时间 certain这里应该不是 确定的意思。比如有时候我们说称取一定量的样品 weigh certain amount of sample
原文由 youjian000 发表:
10.2.1.1 Connection 连接
IdleTimeout=(seconds) 空闲超时(单位为:秒)
Disconnect idle clients after 在...秒后断开客户程序
An idle client is one which has transmitted no keyboard or pointer events for more than a certain length of time. The K4000RC Server can be configured with a threshold, expressed in seconds, after which idle clients will be disconnected to conserve resources.
一个空闲的客户机程序是指:在某一确定时间内,该客户程序没有传输键盘或指针事件。可以给K4000RC服务器配置一个阈值,单位用秒表示,超过这个阈值后,将断开空闲的客户机程序,以节省资源。